Despite the increase in the size of the working chamber of the 5LP linter, the productivity increased by only 5-8%, the weight of the seeding roller and the power consumption increased by 18.5 kWh per saw cylinder, compared to 8.5 kWh. of the electricity consumed by the cylinder of the PMP-160 kW / h linear saw. The research results of the MR-160-11S lining equipment imported from the People's Republic of China and installed at a local cotton ginnery in order to increase the efficiency of the lintering process and improve the quality of seeds and fluff produced are significantly lower than the technical characteristics of the linter, kg / month, on average for wool did not exceed 30 kg / month. It has been studied that the degree of damage to the produced seeds and the degree of contamination of the fluff are high, and the consumer demand for quality seeds and fluff is not fully met. The results of experimental work on the effectiveness of the 5LP linter at the Bokinsky cotton ginning plant showed that the average yield of lint seeds was 724 kg / hour, the average wool yield was 23.8 kg / hour, the average seed yield in terms of technical characteristics was 60.%, it turned out on average to 32% lower. The study shows that ginneries in the Cotton Textile Cluster system need modern, high-performance linter equipment that meets consumer demand for quality seeds and fluff.